File(s) under permanent embargo
A protocol for improving fabrication yield of thin SU-8 microcantilevers for use in an aptasensor
journal contribution
posted on 2015-02-01, 00:00 authored by Yang Lim, Abbas KouzaniAbbas Kouzani, Akif KaynakAkif Kaynak, Xiujuan Dai, Guy Littlefair, Wei DuanWei DuanSU-8 negative photoresist has been extensively employed in the fabrication of microfluidics and microelectromechanical systems. This is due to its advantages including ease of fabrication using limited equipment, biocompatibility, excellent chemical resistance, and compatibility with silicon processing. In addition, its low Young’s modulus compared to silicon has made it an excellent choice for microcantilever structure development especially for sensing applications. This paper presents a fabrication protocol for the development of thin SU-8 microcantilevers. Factors such as baking temperatures and release methods that influence the fabrication yield of SU-8 microcantilevers are considered. The influence of the baking temperature on the deformation of the SU-8 structure is investigated using the finite element method and verified experimentally. Three release methods are studied including a dry release method using fluorocarbon film, and two wet release methods using OmniCoat sacrificial layer and polymethyl methacrylate (PMMA) sacrificial layer. The wet release method using PMMA sacrificial layer produced the highest yield. An aptasensor is formed using the SU-8 microcantilever, and its deflection measured for thrombin detection.
History
Journal
Microsystem technologiesVolume
21Issue
2Pagination
371 - 380Publisher
SpringerLocation
Berlin, GermanyPublisher DOI
ISSN
0946-7076eISSN
1432-1858Language
engPublication classification
C1 Refereed article in a scholarly journal; C Journal articleUsage metrics
Categories
No categories selectedKeywords
Licence
Exports
RefWorks
BibTeX
Ref. manager
Endnote
DataCite
NLM
DC