File(s) under permanent embargo
Development of an inverse routine to predict residual stresses in the material based on a bending test
journal contribution
posted on 2013-01-01, 00:00 authored by Armin Abvabi, Bernard RolfeBernard Rolfe, Peter HodgsonPeter Hodgson, Matthias WeissMatthias WeissBending and reverse bending are the dominant material deformations in roll forming, and hence property data derived from bend tests could be more relevant than tensile test data for numerical simulation of a roll forming process. Recent investigations have shown that residual stresses change the material behavior close to the yield in a bending test. So, residual stresses introduced during prior steel processing operations may affect the roll forming process, and therefore they need to be included in roll forming simulations to achieve improved model accuracy. Measuring the residual stress profile experimentally is time consuming and has limited accuracy while analytical models that are available require detailed information about the pre-processing conditions that is generally not available for roll forming materials. The main goal of this study is to develop an inverse routine that determines a residual stress profile through the material thickness based on experimental pure bend test data. A numerical model of the skin passing (temper rolling) process is performed to introduce a residual stress profile in DP780 steel sheet. The skin passed strips are used in a pure bending simulation to record moment-curvature data and this data is then applied in an inverse analysis to predict the residual stress profile in the material. Comparison of the residual stress profile predicted by the inverse routine with that calculated by finite element analysis (FEA) indicates an inverse approach combined with pure bend test may present an alternative to predict residual stresses in sheet metals.
History
Journal
Key engineering materialsVolume
554-557Pagination
949 - 956Publisher
Trans Tech PublicationsLocation
Stafa-Zurich, SwitzerlandISSN
1013-9826Language
engNotes
This paper was presented at the 2013 16th ESAFORM Conference on Material FormingPublication classification
C1 Refereed article in a scholarly journalCopyright notice
2013, Trans Tech PublicationsUsage metrics
Categories
No categories selectedKeywords
Licence
Exports
RefWorks
BibTeX
Ref. manager
Endnote
DataCite
NLM
DC