File(s) under permanent embargo
Platinum electrodeposition for polymer electrolyte membrane fuel cells
journal contribution
posted on 2001-03-15, 00:00 authored by S Thompson, L Jordan, Maria ForsythMaria ForsythA novel electrodeposition technique for preparing the catalyst layer in polymer electrolyte membrane fuel cells has been designed, which may enable an increase in the level of platinum utilisation currently achieved in these systems. This method consists of a two-step procedure involving the impregnation of platinum ions into a preformed catalyst layer (via an ion-exchange into the Nafion polymer electrolyte), followed by a potentiostatic reduction. The concentration of Nafion within the catalyst layer was found to have a significant bearing on the size of the platinum deposits. The preparation of catalyst layers containing a desired platinum loading should also be possible using this method. Surface areas of the platinum deposits were determined using cyclic voltammetry. The prepared catalyst was compared with a conventional electrode made from E-TEK Pt/C. Scanning electron microscopy was used to investigate the dispersion of the platinum particles. Platinum loadings were determined quantitatively by atomic absorption spectroscopy.
History
Journal
Electrochimica actaVolume
46Issue
10-11Pagination
1657 - 1663Publisher
Elsevier Science Pub. Co.Location
New York, N.Y.Publisher DOI
ISSN
0013-4686eISSN
1873-3859Language
engPublication classification
C1.1 Refereed article in a scholarly journalCopyright notice
2001, Elsevier Science Ltd.Usage metrics
Categories
No categories selectedKeywords
Licence
Exports
RefWorks
BibTeX
Ref. manager
Endnote
DataCite
NLM
DC